Volume 7, Issue 2, March 2019, Page: 33-37
A New Dynamic Fracture Plugging Evaluation Method and Its Application in Cementation for Mudstone and Sandstone Formation with Narrow Pressure Range in China South Sea
Jianglin Zhu, School of Materials Science and Engineering, South China University of Technology, Guangzhou, P. R. China; China Oilfield Services Limited Oilfield Chemicals Division, Zhanjiang, P. R. China
Jiangxiong Wei, School of Materials Science and Engineering, South China University of Technology, Guangzhou, P. R. China
Qijun Yu, School of Materials Science and Engineering, South China University of Technology, Guangzhou, P. R. China
Mingbiao Xu, Petroleum Engineering College, Yangtze University, Wuhan, P. R. China
Yuwei Luo, China Oilfield Services Limited Oilfield Chemicals Division, Zhanjiang, P. R. China
Received: Apr. 7, 2019;       Accepted: May 29, 2019;       Published: Jun. 12, 2019
DOI: 10.11648/j.ijsts.20190702.11      View  53      Downloads  16
Abstract
One of the difficulties in high temperature and high pressure wells and deepwater well cementation in China South Sea is that the pressure range is very narrow. In the drilling or cementation process, the formation is easy to form sharp crack leakage. In general, the traditional simulation of bottom-hole mud or cement slurry leakage is to use the mesh plate or fixed width at a certain temperature and pressure difference. However, when there are wedge cracks in the formation, it will cause repeated "huff and puff" dynamic leakage of fluids. Dynamic leakage puts forward higher requirements for evaluation methods and plugging materials. In view of the problems, a new dynamic fracture plugging evaluation instrument was developed, and the new hydraulic wedge plugging material and matching cementing technology were optimized, which solved the problem of cement slurry leakage and return in China South Sea. The results of this paper have been successfully applied in cementing operations of high temperature and pressure wells and deepwater wells in the China South Sea, effectively solving the problem of hydraulic wedge leakage in sandstone formation cementing with narrow safety pressure window.
Keywords
Dynamic Fracture, Plugging, Deepwater, High Temperature and High Pressure, Cementation
To cite this article
Jianglin Zhu, Jiangxiong Wei, Qijun Yu, Mingbiao Xu, Yuwei Luo, A New Dynamic Fracture Plugging Evaluation Method and Its Application in Cementation for Mudstone and Sandstone Formation with Narrow Pressure Range in China South Sea, International Journal of Science, Technology and Society. Vol. 7, No. 2, 2019, pp. 33-37. doi: 10.11648/j.ijsts.20190702.11
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Xiao Yao, Baozhong Zhou, Yuancai Zhao, et al. Leak Resistance techniques of thief zone cementing in domestic oil and gas fields [J]. Natural Gas Industry, 2005, 25 (6): 45-48.
[2]
Yang Wu, Zhihai Xiao, Xiaogang Shen, et al. Study on well cementing techniques for wells with lost circulation in Jingnan area [J]. Drilling Fluid and Completion Fluid, 2017, 34 (06), 95-99.
[3]
Low N, Daccord G, Bedel J P. Designing fibered cement slurries for lost circulation applications: case histories [C]. SPE 84617, 2003.
[4]
Deyu Wang, Xiaolin Pu, Taihe Shi, et al. Introduction and evaluation of mode dl-1 device for lost circulation control [J]. Oil Drilling and Production Technology, 1996, 18 (5): 44-48.
[5]
Yuguo Hu, Jicun Yuan. Application of plugging materials for lost circulation in petroleum drlling [J]. Drilling Fluid and Completion Fluid, 2000, 17 (3): 38-40.
[6]
Zhengguo Zhao, Xiaolin Pu, GuWang, et al. Bridge plug plugging drilling fluid technology of fractured leakage [J]. Drilling Fluid and Completion Fluid, 2012, 29 (3): 44-46.
[7]
Don Whitfill. Lost circulation material selection, particle size distribution and fracture modeling with fracture simulation software [C]. SPE115039, 2008.
[8]
Dang D H, Gao F, He J Y, et al. Research and application of cement plugging techniques in evaporite bed of piedmont tectonic belt of the Tarim Basin [J]. Advanced Materials Research, 2013, 807-809: 2634-2638.
[9]
Huajie Liu, Yuhuan Bu, Jay G. Sanjayan, et al. The application of coated superabsorbent polymer in well cement for plugging the microcrack [J]. Construction and Building Materials, 2016, 104: 72-84.
[10]
Jianlong Zou, Jiansheng Qu, Guangming Lv, et al. Laboratory evaluation of fiber cement in resuming lost circulation [J]. Drilling Fluid and Completion Fluid, 2007, 24 (2): 42-44.
[11]
Yili Kang, Kaicheng Wang, Chengyuan Xu, et al. High-temperature aging property evaluation of lost circulation materials in deep and ultra-deep well drilling [J]. Acta Petrolei Sinica, 2019, 42 (2): 215-223.
[12]
Effendhy,Junaidi H, Abbas R, et al. Fibers in cement form network to cure lost circulation [J]. World Oil. 2003, 224 (6): 48-50.
[13]
El-Hassan H I, Abbas R, Munk T. Using a novel fiber cement system to control lost circulation: case histories from the middle east and the far east [C]. SPE 85324, 2003.
[14]
Tingting Yu, Jianmin Deng, Jian Li. Laboratory research on use of fiber cement slurry to prevent lost circulation [J]. Oil Drilling and Production Technology, 2007, 29 (4): 89-91.
[15]
Tingting Yu, Jianmin Deng, Jian Li, et al. Research on the High Density Cement Slurry Containing Fibers [J]. Drilling Fluid and Completion Fluid, 2008, 25 (2): 40-42.
[16]
Sudong Hua, Xiao Yao, Huajun Zhu, et al. Anti-lost-circulation performance evaluation and function mechanism of fiber slurry system [J]. Journal of China University of Petroleum, 2012, 36 (1): 158-161.
Browse journals by subject