Volume 7, Issue 1, January 2019, Page: 1-7
Tensile Behaviour of Oil Bean Pod Shell and Mahogany Sawdust Reinforced Epoxy Resin Composite
Umurhurhu Benjamin, Department of Mechanical Engineering Technology, Delta State Polytechnic, Ozoro, Nigeria
Uguru Hilary, Department of Agricultural and Bio-environmental Engineering Technology, Delta State Polytechnic, Ozoro, Nigeria
Received: Dec. 8, 2018;       Accepted: Jan. 5, 2019;       Published: Feb. 25, 2019
DOI: 10.11648/j.ijsts.20190701.11      View  26      Downloads  15
Abstract
The influence of fillers loading rate on the tensile behaviours (tensile strength, Young Modulus, tensile energy, tensile strain and Stress at LOP) of reinforced epoxy composites were investigated in this research. Both filler materials (OBPS and SD) where treated with 5(w/v)% Sodium hydroxide solution for 1 hour at ambient temperature of 27±3°C. The composite samples were prepared with five different volume (10, 15, 20, 25 and 30 vol%) of OBPS and SD in the ratio of 1:1, using the hand lay-up method. All the composite samples were prepared and tested according to ASTM standards, using the Universal Testing Machine. Results from this present research showed that the fillers loading had significant (P ≤ 0.05) effect on all the tensile behaviors investigated. In addition, the results showed that all the five tensile behaviours of the samples increased gradually with increase in fillers loading. The tensile strain increased by 53.18%, as the fillers loading increased from 10% to 30 vol.%.in addition the tensile strength increased from 7.86 to 27.47 MPa, while the Young modulus increased from 668.4 to 1235.93 MPa. Results obtained from this study can be helpful in the production of composite boards for industrial applications.
Keywords
Mahogany, Sawdust, Tensile Properties, Oil Bean Shell, Epoxy Composite
To cite this article
Umurhurhu Benjamin, Uguru Hilary, Tensile Behaviour of Oil Bean Pod Shell and Mahogany Sawdust Reinforced Epoxy Resin Composite, International Journal of Science, Technology and Society. Vol. 7, No. 1, 2019, pp. 1-7. doi: 10.11648/j.ijsts.20190701.11
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Samuel, B (2012). A Natural History of Belize: Inside the Maya Forest. Austin: University of Texas Press. 164–165.
[2]
Bruck, M, (2005). Guitar World Presents Guitar Gear 411. Alfred Music Publishing.
[3]
Hirst, T. (2003). Electric Guitar Construction. Hal Leonard Corporation.
[4]
Skyfruitseed (2018). “Mahogany”. Available at: https://skyfruitseed.com/important-facts-and-information-about-mahogany/.
[5]
Verma, D., Gope, P. C., Maheshwari, M. K. and Sharma, R. K. (2012). Bagasse fiber composites-A Review. J. Mater. Environ. Sci. 3 (6): 1079-1092.
[6]
Kennedy, D. (2018). Types of composite materials. Available at: https://sciencing.com/types-composite-materials-5868282.html.
[7]
Jacob, M., Thomas, S. and Varughea, K. T. (2004). Mechanical properties of sisal/oil palm hybrid fibre reinforced natural rubber. Composites Science and Technology, 64(7-8): 955-965.
[8]
Brígida, A. I. S., Calado, V. M. A., Gonçalves, L. R. B. and Coelho, M A Z. (2010). Effect of chemical treatments on properties of green coconut fiber. Carbohydr. Polym., 79(4): 832–838.
[9]
[9] Mokaloba, N. and Batane, R. (2014). The effects of mercerization and acetylation treatments on the properties of sisal fiber and its interfacial adhesion characteristics on polypropylene. Int J Eng. Sci. Technol. 6(4): 83–97.
[10]
Prosper. O and Uguru, H. (2018). Effect of fillers loading on the mechanical properties of hardwood sawdust/oil bean shell reinforced epoxy hybrid composites. Int J S Res Sci. Engg. Tech. 4(8): 620-626.
[11]
Wang, B., Panigrahi, S., Tabil, L., Crerar, W., Sokansanj, S and Braun, L. (2003). Modification of flax fibers by chemical treatment. CSAE/SCGR 2003 Meeting Montréal, paper no. 03-337, Québec: 1 – 15.
[12]
Aji I S, Zainudin E S, Sapuan S M, Khalina A and Khairul M D (2012), Study of hybridized kenaf/PALF-reinforced hdpecomposites by dynamic mechanical analysis. Polym.-Plast. Technol. Eng. 51(2):146-153.
[13]
Taib R M, Hassan H M and Ishak Z A. M (2014). Mechanical and morphological properties of polylactic acid/kenaf bast fiber composites toughened with an impact modifier. Polym. Plast. Technol. Eng. 53(2): 199-206.
[14]
Cao, Y., Shibata, S. and Fokumoto, I. (2006). Mechanical properties of biodegradable composites reinforced with bagasse fiber before and after alkali treatment. Composites Part A, Applied Science and Manufacturing 37: 423–429.
[15]
John, O. O. and Samuel, I. A. (2010). Potential of carbonized bagasse filler in rubber products, J. Emer. Trends in Eng. Appl. Sci. (JETEAS) 1:157-160.
[16]
Murali M. R. K., Ratna P. A. V., Ranga, B. M., Mohan R. K. and Gupta A. (2007). Tensile properties of elephant grass fiber reinforced polyester composites. J. Mat. Sci. 42: 3266-3272.
[17]
Srinivasababu, N., Rao, K. M. and Kumar, J. S. (2009). Experimental determination of tensile properties of okra, sisal and banana fiber reinforced polyester composites. Indian Journal of Science and Technology. 2(7): 35 – 38.
[18]
Motaleb, K. S. M. (2018). Improvement of mechanical properties by alkali treatment on pineapple and jute fabric reinforced polyester resin composites. International Journal of Composite Materials. 8(2): 32-37.
[19]
Kalam, A., Sahar, B. B., Khalis, Y. A. and Wong, S. V. (2005). Fatigue behaviour of oil palm fruit bunch fibre/epoxy and carbon fibre/epoxy composites. Composite Structure. 71: 34-44.
[20]
Li, Y., Mai, Y. W. and Ye, L. (2000). Sisal fibre and its composites: a review of recent developments. Composites Science and Technology 60: 2037-2055.
[21]
Siregar, J. P., Sapuan, S. M., Rahman, M. Z. A., and Zaman, H. M. D. K. (2010). The effect of alkali treatment on the mechanical properties of short pineapple leaf fibre (PALF) reinforced high impact polystyrene (HIPS) composites. J. of Food, Agriculture & Environment. 8(2):1103-1108.
[22]
Mohanty, A. K., Mubarak, A. K. and Hinrichsen, G. (2000). Surface modification of jute and its influence on performance of biodegradable jute-fabric/Biopol composites. Composites Science and Technology 60:1115-1124.
Browse journals by subject